Instruction Manual

3
KX3 Touchscreen Installation Instructions
KX3 Touchscreen
INSTALLATION INSTRUCTIONS
MOUNTING OPTION
The KX3 Touchscreen is designed for flush-mount, in-wall installations. It requires an available mounting depth of 52.5 mm
(2 inches) from the surface of the wall. The recommended mounting height for the KX3 Touchscreen is between 1.4 and 1.5 m
(4.5 and 5 ft) from the bottom of the faceplate.
KX3 front
(bezel removed)
Bezel
74.7 mm
(2.9 inch)
131.8 mm
(5.2 inch)
Wall Stud
Wall
Opening
Ethernet Cable
(from PoE Switch)
Mouting Height
1.4 — 1.5 m
(4.5 — 5 ft )
from bottom
of faceplate
Note: There is little margin for error when fitting the KX3 Touchscreen into the wall opening. Make sure to use the included
cardboard cut-out template to create the correct size opening in the wall. Additionally, carefully double-check that all
measurements taken using the cardboard cut-out template are accurate.