Troubleshooting guide

ENGLISH
NovaJet 800 Series Printer Quick Start Guide
33
6 When ink is visible in the ink primer sight tube (should take 5-10
seconds), close the ink delivery lines by pushing valve up and
remove the cartridge needle from the ink primer. Note: Once
removed from the delivery line, continue to press the button on the
ink primer a few seconds longer to prevent leaking from the primer.
7 Close the ink delivery line by pushing the valve up. If you have a
shipping cap cartridge, continue with step 8. If you have a needle
assembly cartridge, skip to step 9.
8 If you have a shipping cap cartridge, insert the needle into the open
top of the cartridge. Be sure the needle is tightly connected by
turning the fitting clockwise until finger-tight. Gently tighten the fitting
(about 1/4 turn) to prevent air leaks. Do not overtighten. Continue
with step 10.
9 If you have a needle assembly cartridge, remove the needle
assembly from the carrier and discard or save for a spare. Connect
the needle assembly from the cartridge to the fitting on the carrier.
10 Open the ink delivery line by pushing the valve down.