Troubleshooting guide

NovaJet 800 Series Printer Quick Start Guide
32
➪ To prime the ink delivery lines
1 Close the ink delivery lines by pushing the valve up.
2 Insert a needle assembly connector into the fitting on the carriage.
On the left bank of cartridges, there are two connectors for each
cartridge - one is blue and the other is gray. Be sure that the needle
assembly is plugged into the same color connector as the ink
reservoir.
3 Open the ink delivery lines by pushing the valve down.
4 Insert the needle into the small hole on the ink primer.
5 Press the button on the ink primer to activate the vacuum and draw
ink from the reservoir into the needle.