Troubleshooting guide

NovaJet 800 Series Printer Quick Start Guide
10
Note: The dryer brackets have slots for the screw holes. Use these
slots to position the dryer further away from the printer when using
thick roll media.
11 Locate the pivot brackets with attached risers. Remove the self-
locking pins securing the risers to the brackets. Place the self-
locking pins and risers nearby for installation in the next step.
12 Attach the two pivot brackets to the dryer using four of the size 8-32
screws. The small end of the sloping bracket should point away
from the printer.
13 Next, slide a riser into each of the pivot brackets. Align the two holes
on the riser with the two holes in the bracket. Secure with the two
self-locking pins on each bracket from the inside of the printer to the
outside.