Instructions

[6]
5) Slide the Repair Channel
over the Seat Pivot.
An 8” Repair Kit is shown, but the
same steps apply for the 6” Repair Kit.
Make sure the side with the rounded
edge is against the Skid Plate. It is
labeled “bottom.”
6) Align the holes in the Repair
Channel with the rivnuts in the
Seat Pivot.
You may need a rubber mallet to fully
align the Repair Channel.
5) Check the range of rotation.
It will be limited, but the Seat Pivot
should still rotate enough for the
adjustable dump feature. If the tabs
on the Repair Channel interfere with
the welds on the frame, you can file
the tabs down.
6) Check that the new 1/4-20 x
1 1/2” Sidewalk Bolts thread
all the way through both sets
of holes in the Repair Channel.
If you are having difficulty, inspect
that the Seat Pivot Plate is flat and
the rivnuts are straight. They may
have bent with a broken weld.