Instructions

Dynamique Seat Pivot
[5]
Install Your Seat
Repair Kit
✔
1) Remove the Seat Liner from
the Seat.
2) Unfasten the two sidewalk
bolts at the rear of the Seat.
Use a #2 Phillips screwdriver. You can
discard the two rear bolts. They will
not be reused.
3) Unfasten the two 1/4-20 x 1
7/8" button head screws at the
Seat Dump Bracket.
Shift the ski into the “Up” position to
improve access to the bolts and use a
5/32” Allen wrench. Save the two
bolts. They will be reused.
4) Remove the Seat from the
Frame.
You can now inspect your Seat Pivot.