Instructions

[2]
Recall Notice
It is Enabling Technologies goal to uphold the highest quality of products,
service, and safety in the industry. We regret to inform you of this recall
notice for all Dynamiques sold before January 1, 2018.
All Dynamiques with initial versions of the Dynamique’s Seat Pivot must
install a Seat Pivot Repair Kit before they can safely use their ski on the
slopes again.
This notice is outside of our Adaptive Skiing Equipment Warranty Policy.
Seat Pivot Repair Kits are free of charge regardless of warranty eligibility and
are not limited to only original owners.
The Issue:
We have learned that using the handles on the seat to pick a skier up after
they fall can cause the welds on initial versions of the Dynamique’s Seat
Pivot to crack and break.
The Solution:
We have developed a Seat Pivot Repair Kit that strengthens the welds by
bracing the seat mounting plate. The Seat Pivot Repair Kit is designed to
hold the seat mounting plate in place even if welds have broken. It is not
necessary or advised to re-weld any broken welds.
Obtaining a Seat Pivot Repair Kit:
Please see pages 3-4 to identify if you need a repair kit and if so, which one.
If your Dynamique does not have a Seat Pivot Repair Kit installed and is
listed as a version that needs one, please contact us immediately at
[e-mail]
.
A Seat Pivot Repair Kit must be installed on all Dynamiques with initial
versions of the Dynamique’s Seat Pivot. Install a repair kit even if your ski
does not show signs of cracking. The repair kit provides a failsafe if a weld
were to crack at a later time.
Please read the instructions in their entirety before installing a Seat Pivot
Repair Kit. Contact us if you have any questions.