Instruction Manual

1. Clamping Options:

Clamping Options: Clamping Options:

Clamping Options: Our mounting clamp is designed for

mounting to tubular (wheelchair, bedrail, walker, etc.) or flat

surfaces such as a table top or desk. For flat surface mounting

use the included wedge insert shoe stored in front of the locking

knob on the clamp (see Fig.1 & 2)

Loosen locking knob slightly to

remove wedge, tighten knob once wedge has been removed.

Fig.1

Fig.1Fig.1

Fig.1

Fig. 2

Fig. 2Fig. 2

Fig. 2

2. Using the mounting clamp, attach the Ultimate Switch to a Wheel

Chair, Table or Desk. Tighten the clamp enough to hold the

Ultimate Switch securely, but do not over-Tighten the clamp.

3. For some mounting applications the clamp will need to be

mounted horizontally, we have included a Gooseneck clamp

mount adapter for this use. To use the adapter you first must

remove the Gooseneck from the clamp, do this by loosening the

set knob on the back of the clamp. This is the same knob that

holds the clamp wedge (shown in Fig.1). Next depress the spring

loaded pin on the side of the clamp and pull the Gooseneck from

the clamp (see Fig.3). Attach the adapter to the Gooseneck and

secure with the included mounting screws as shown in (Fig. 4 &

5).

Fig.3

Fig.4 Fig.5

Fig.4 Fig.5Fig.4 Fig.5

Fig.4 Fig.5

Rev 3

Rev 3Rev 3

Rev 3/

/30

3030

30/1

/1/1

/17