User`s guide

View
off this feature. When the box is not selected the user is in control of the
exposure time that can be changed by either typing in the exposure time box
and then pressing the Enter key, or by hitting the up and down arrow keys to
respectively double or halves the exposure time.
To view a continuous image of the sample:
• Select the Camera inserted box or make sure it is selected.
• Setup: Search mode
• Press Start View to start the image acquisition
If you need to better adjust the microscope focus on the sample:
• Click Focus Loupe in the Camera View window.
Only the selected area (see Figure 3-2) will be imaged at a very fast rate
allowing to set a more precise focus on the area of interest.
Figure 3-1 Image window
UltraScan User’s Guide Reference Series Rev 1.0 3-2