User manual

ManualsBrandsEnable-IT ManualsComputer equipment895 Series

A l l R i g h t s R e s e r v e d 1 9 9 7 - 2 0 0 8 E

N A B L E

-I T

 - P r o p r i e t a r y a n d C o n f i d e n t i a l

E n a b le -I T 89 5 Se ries

E xten d e d E th e rn e t

U ser Man u a l



Summary of content (13 pages)

PAGE 2
Copyright © 1997- 2008, Enable-IT, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Enable-IT, Inc. Enable-IT, Inc reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of Enable-IT, Inc to provide notification of such revision or change.
PAGE 3
CONTENTS ABOUT THIS GUIDE 4 1 INTRODUCING THE ENABLE-IT 895 EXTENDED ETHERNET UNIT 5 About the 895 Extended Ethernet Unit Key Benefits Summary of Features Typical Applications 2 INSTALLING THE ENABLE-IT 895 EXTENDED ETHERNET UNIT Site Plan – Installation Design Considerations Unpacking the 895 Extended Ethernet Kit Performing the On-Site Installation Mounting the 895 Extended Ethernet Units 5 6 6 7 8 8 9 9 9 A TECHNICAL SUPPORT Online Technical Services World Wide Web Site Returning Products for Rep
PAGE 4
ABOUT THIS GUIDE This guide provides all the information needed to install and use the Enable-IT 895 Extended Ethernet Unit. This guide is intended for use by technicians who are responsible for installing and setting up network equipment. Consequently, it is assumed that the installer has a basic working knowledge of LANs (Local Area Networks) and voice telecom wiring.
PAGE 5
INTRODUCING THE 895 EXTENDED ETHERNET UNIT Congratulations on purchasing the Enable-IT’s 895 Extended Ethernet Unit — the simplest method to stretch your broadband solutions for in-building deployment in commercial office buildings, hotels, and multi-tenant residential units. The 895 Extended Ethernet Unit offers the Lowest Cost Solution in a simple design for rapid install using existing 1 pair Telco wiring.
PAGE 6
Key Benefits The following list identifies the 895 Extended Ethernet Unit key benefits. • Dramatic cost reduction over any competing technology. • Broadband technology that delivers in-building Ethernet access over 1 pair of existing Category 2 up to Category 5e wiring up to 1,970’, whether spare or actively in use for analog or digital voice. This means no new wiring is required. • Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
PAGE 7
Typical Applications Enable-IT 895 Extended Ethernet Units are usually installed into telephone wiring infrastructures where extension of backbone services is required and expensive fiber options are prohibitive. The 895 Extended Ethernet Units allow a standard Ethernet segment to be deployed quickly over existing 1 pair Telco Copper Wiring in combination with existing POTS voice signals. The innermost pins (2 & 3) are used for transport for both voice and data.
PAGE 8
INSTALLING THE 895 EXTENDED ETHERNET UNITS The Enable-IT 895 Extended Ethernet Units have a distance restriction of 1,970ft or 600m over 1-pair of Category 2 up to Category 5e / CAT6 wiring from device extension to device extension. Therefore quick, simple site surveys and installation planning are highly recommended. This chapter describes the recommended installation process for the Enable-IT 895 Extended Ethernet Unit.
PAGE 9
Unpacking the Enable-IT 895 Extended Ethernet Kit Carefully remove the Enable-IT 895 Extended Ethernet Units all packing materials from the box. Verify that the items listed below are present. Make sure that the equipment supplied matches what you ordered. If any items are missing or damaged, please contact your Enable-IT or your distributor for assistance.
PAGE 10
 Prior to performing a remote link install, test your setup and equipment. Connect your LAN to the Ethernet port of the primary 895 unit and power adapter. Using the provided telephone patch cord & DSL filter, connect each end of the cord into the Line port on both 895 units. Connect your remote end device or LAN to the Ethernet port of the remote 895 unit and power adapter. Power on all equipment and test your connectivity and throughput. The Power, Activity and Link lights will initially come on.
PAGE 11
Returning Products for Warranty Repair Enable-IT, Inc. warrants to the original purchaser of the Product ("you" or the "End User") that, for the one (1) year period commencing on the date the Product was purchased (the "Warranty Period"), the Product will be substantially free from defects in materials and workmanship under normal use and conditions. Electrical damage is not an item that is covered under this warranty or extended warranties.
PAGE 12
PARAGRAPH SHALL BE THE END USER’S SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE FOREGOING WARRANTY. c. Conditions for Warranty Qualification If authorized by Enable-IT to return a Product which does not conform to the warranty set forth above, the End User must: (1) obtain a return materials authorization (RMA) number from Enable-IT by contacting the Customer Service Dept. at 888-309-0910 between the hours of 8:00 a.m. and 5:00 p.m.
PAGE 13
INCLUDING WITHOUT LIMITATION BREACH OF WARRANTY, OR IN CONTRACT OR IN TORT (INCLUDING NEGLIGENCE), OR STRICT LIABILITY, EVEN IF ENABLE-IT HAS BEEN PREVIOUSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND EVEN IF A LIMITED REMEDY SET FORTH IN THIS AGREEMENT FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL ENABLE-IT’ LIABILITY TO THE END USER OR ANY THIRD PARTY EXCEED THE PRICE PAID FOR THE PRODUCT.