User`s manual

Logging Data 6-11
December 2003
Checking the Data Logger Memory (cont.)
Use the following formula to figure out how many pages a log
will use:
length of log × no. of readings/unit time = no. of records then,
no. of records ÷ 120 = no. of pages
For example, if you select a log to run for 24 hours with a time
increment of 1 minute this log will use 12 pages of memory
because:
24 × 60 = 1440 records
1440 ÷ 120 = 12 pages
To Stop Logging
To stop logging:
1. Press the [LOG] key to access the Log Menu.
2. Press [F3] to select “STOP.”
3. Use the appropriate feature key to select the name of the log.
Use the [←] [→] keys to view all the available logs.
4. At the next prompt:
• Press [F1] to continue to log and exit the Log Menu.
• Press [F2] to stop logging and exit to the Log Menu.
To exit the Log Menu, press [EXIT].