User`s manual

December 2003
6-10 Logging Data
Checking the Data Logger Memory
Although the TransPort has 120 pages for logger memory, it is a
good practice to check the availability of logger memory after
setting up a log to see if the amount of data you want to log
exceeds the amount of available memory. To check the memory
do the following:
1. If you have not, access the Log Menu by pressing the [LOG]
key.
2. Press [F2] to select memory.
Figure 6-3: Viewing Data Logger Memory
The screen displays the number of pages available out of 120
pages (see Figure 6-3). In addition, the number of pages pending
is also shown. The pages pending is the amount of memory which
will be used by all programmed logs.
If the amount of memory pending exceeds the available memory,
you must either clear old logs as described in Chapter 7, Clearing
Data, or return to the previous section, Entering Data Logger
Parameters, and switch to a less frequent time increment and/or
shorten the log time.
3. When you are finished viewing, press [ENT].
The TransPort returns to the beginning of the Log Menu. To exit,
press [EXIT].
LOG MEMORY LEFT *
LOGGING
Memory
118/120 Pages FREE
7 Pages PENDING