User`s manual

Logging Data 6-7
December 2003
Entering Data Log Parameters (cont.)
7. Entering the Log End Time
Enter the time you want to end the log.
• Press [F1] to accept the current end time, and proceed to
Step 8.
Note: The log end time must exceed the start time by at least 5
minutes.If the log is circular, it will prompt you for a
duration of the log, rather than an end time.
• To enter a new end time:
a. Press [F2] to edit the end time.
b. Press the appropriate feature key to select AM or PM.
c. Use the numeric keys to enter the hour. Press [ENT].
d. Use the numeric keys to enter the minutes. Press [ENT].
e. Use the numeric keys to enter the seconds. Press [ENT].
Proceed to Step 8.
• To end the log in a specified period of time:
a. Press [F3] to select “TIMED.”
b. Press the appropriate feature key to select a log time. Use
the [←] [→] keys to view all the selections.
Proceed to Step 8 to complete entering the log parameters.
Note: The longer the log runs the more memory it uses.