User`s manual

Displaying Data 4-15
December 2003
Displaying the Signal (cont.)
When displaying the signal, the TransPort can display the
following :
• Upstream signal (Sup)
• Downstream signal (Sdown)
• Upstream Correlation (Cup)
• Downstream Correlation (Cdown)
• Cross-correlation (CC)
You can toggle between the above displays using the [1] and [2]
keys. [1] toggles up, and [2] toggles down. Additionally, [4]
vertically enlarges the signal, and [5] reverts it to the original
size. [7] horizontally compresses the display, while [8] reverts it
to the original size.
Note: To re-enter this format on exiting, you must set up the
display again as described on page 4-13.