User`s manual

December 2003
4-14 Displaying Data
Displaying the Signal (cont.)
To view the signal, use the [<CURS] and [CURS>] feature keys
to move the cursor left and right within the current page. Use the
[<PAGE] and [PAGE>] feature keys to move quickly from page
to page of the signal. When you move the cursor, the Status Line
(see Figure 4-7 on the previous page) displays the signal
amplitude and the time.
Use the [←] [→] keys to access the other viewing options. Each
option is described below.
• START - This feature key automatically moves the cursor to
the beginning of the page. In addition, the TransPort displays
the start date and time of that page on the message line (see
Figure 4-7).
• END - Conversely, this feature key automatically moves the
cursor to the end of the page and displays the end date and time
of that page on the message line.
• YMAX - This feature key displays the Y axis maximum,
which is 512 divisions in arbitrary units. The TransPort
displays the Y axis maximum on the message line.
• T INC - This feature key displays the time increment, which is
based on the sampling rate (frequency of the transducers). For
example, for 1 MHz transducers, it is 0.125 microseconds. The
TransPort displays the time increment on the message line.
• EXIT - This feature key lets you exit the Signal Format and
return to the default Big Format. When you exit to the Big
Format, the TransPort displays site measurements, not the
signal.