User`s manual

December 2003
4-8 Displaying Data
Log Format
The Log Format enables you to display logged data graphically or
numerically. The TransPort displays all of the data in the log file;
however, because of the limited space on the screen, the
TransPort cannot display all data on the screen simultaneously.
Therefore, you must use the feature key options to view the
remaining data.
Note: Before viewing a log, you must create a log. This process
is described in Chapter 6, Logging Data.
Use the appropriate section below to set up and use the graph or
numeric format to display logs.
Displaying Logs in the Numeric Format
1. Press the [DISP] key.
2. Press [F4] to select “LOG.”
3. Use the [←] [→] keys to view all the log file names. Use the
appropriate feature key to select the desired file.
4. Press [F1] to select “NUM”.
The TransPort automatically exits the Display Menu and displays
the desired log data in numeric form. Use the following section to
view data.