User`s manual

Displaying Data 4-7
December 2003
Using the Graph Format (cont.)
Note: Since the time displayed on the status line will only show
whole minutes and not seconds, if you selected a time
increment of less than 1 minute, the time will not change
every time you press the cursor key. For example, if you
chose a 5-second increment, you will have to press the
cursor key 12 times before the time changes.
Use the [←] [→] keys to access the other feature key options for
viewing the data in the graph format. Each option is described
below.
• START - This feature key automatically moves the cursor to
the beginning of the page. In addition, the TransPort displays
the start date and time on the message line (see Figure 4-4).
• END - Contrary to the [START] key , this feature key
automatically moves the cursor to the end of the page and
displays the end date and time on the message line.
• YMAX - This feature key displays the Y axis maximum (full
scale) chosen when setting up the graph (as described on the
previous page). The TransPort displays the Y axis maximum
on the message line.
• T INC - This feature key displays the time increment chosen
when setting up the graph (as described in the previous
section). The TransPort displays the time increment on the
message line.
• EXIT - This feature key lets you exit the Graph Format and
return to the default Big Format.
Note: To reenter the graph format on exiting, press
[DISP],[GRAPH] and [EXIT] to return to the former
graph.