User`s manual

December 2003
4-4 Displaying Data
Graph Format
The Graph Format enables you to show velocity or volumetric
flow on an X and Y line graph at specified time intervals as
shown in Figure 4-3. The Graph Format is useful for indicating
trends and changes in flow measurements. Use the sections below
to set up and use the Graph Format.
Figure 4-3: Graph Format
Setting Up the Graph Format
Use the following steps to set up the Graph Format:
1. Press the [DISP] key.
2. Press [F3] to select “GRAPH”.
3. At the next prompt select the “Graph Variable”, which is the
measurement you want to display: either velocity, volumetric
or power (with the energy option). Use the appropriate feature
key to respond.
15.2 GAL/M 09:00
V
O
L
U
M ST:10 NOV 92 09:34
<CURS CURS> START END
