User`s manual

Programming Site Data 3-9
December 2003
Entering System Parameters (cont.)
6. Choosing Totalizer Units
To select the units for totalized flow:
a. Use the [←] [→] keys to view all the options available. See
Table 3-2 for a list of available totalizer units.
b. Press the appropriate feature key to make a selection.
7. Choosing Power Units
If you chose to measure energy earlier in SYSTeM, the TransPort
will now prompt you to choose the units for energy. If you chose
not to measure energy, skip to Step 11, Setting the Date.
Use the appropriate feature key to respond.
• Press [F1] for kBTU - Thousands of British Thermal Units per
Hour
• Press [F2] for MMBTU - Millions of British Thermal Units
per Hour
• Press [F3] for kW - Kilowatts
• Press [F4] for Tons - Tons.
Table 3-2: Totalizer Units Options
English Totalizer Units Metric Totalizer Units
Gal - U.S. Gallons L - Liters
MGAL - Mega U.S. gallons ML - Megaliters
ft
3
- Cubic Feet m
3
- Cubic Meters
Mft
3
- Mega Cubic Feet Mm
3
- Mega Cubic Meters
BBL - Barrels BBL - Barrels
MBBL - Megabarrels MBBL - Megabarrels
Acre-inches
Acre-feet