User`s manual

December 2003
3-6 Programming Site Data
Entering System Parameters (cont.)
Use the steps that follow to enter the system parameters.
1. Choosing the Energy Option
The first prompt asks you if you want to measure energy. Use the
appropriate feature key to respond:
• Press [F1] if you do not want to measure energy flow rate, or
• Press [F2] if you do want to measure energy flow rate.
If you choose to measure energy flow rate, the TransPort will ask
additional questions within this menu.
Note: To measure energy you must have either two temperature
inputs connected to the analog inputs or you must enter
two fixed temperatures into the TransPort as described on
page 3-29.
2. Entering the Site Message
Use the alphanumeric keys to enter a brief description of the site
location, and then press the [ENT] key.
Because the TransPort can store up to 20 sets of site location data,
this message provides a space to enter a description as long as 21
characters to help you distinguish one file from another.
3. Choosing the System Units
Use the proper feature key to choose the system units which
determine whether the TransPort will display subsequent
parameters or flow measurements in English or metric units.
• Press [F1] for English Units, or
• Press [F2] for Metric Units.