User`s manual

Initial Setup 2-11
December 2003
Keypad
The TransPort keypad has 30 keys and each key has a second
function. The functions for each key are as follows (see Figure
2-5 on the next page):
• 4 feature keys ([F1], [F2], [F3], [F4]) - enable you to select the
special functions or parameters which appear at the bottom of
the screen.
• 12 numeric keys (including - and .) - enable you to enter
numeric data.
• Arrow Keys>4 arrow keys ([← ], [→], [↑ ], [↓ ]) - enable you
to move through the menu options.
• 6 task keys (PROG, PRNT, LOG, DISP, CLR, and CAL) -
perform specific tasks for flowmeter operation. Each task key
is described in its corresponding section in this manual.
• [ENT] - enters selected values into the TransPort memory.
• [EXIT]- enables you to exit menus or menu options at any
time.
• [ON] - turns the power on.
• Shift key (red key) - enables you to use the second functions of
each key which are described below.
Each of these keys has a second shift function printed in red
above the key. For example, OFF is the shifted function of the
[ON] key. Most of the second functions are used for entering text.
However, two keys have special second functions:
• [SHIFT] [ENT] - enters the on-line help function which is
described in the following section.
• [SHIFT] [DISP] - acts as a space key when entering
alphanumeric information.