User`s manual

December 2003
G-2 Screen and Error Messages
All Sites Cleared!
hit key
This message may appear while per-
forming the following:
•saving a new site - the user did not
enter a new name or select to overwrite
an existing site;
•recalling a site - there are no site files
to recall;
•clearing a site - there are no sites to
delete;
•printing a site - there are no sites to
print;
•displaying a site - there are no sites to
display.
Hit any key and the TransPort returns to
making measurements
.
Backup Battery
FAIL
This message appears at power up.
This message indicates the backup bat-
tery, which stores the non-volatile
RAM, has failed. Contact the factory.
Backup Battery OK This message appears at power up. This
message indicates the backup battery,
which stores the non-volatile RAM, has
passed.
Do you want to
SAVE
This message appears when you try to
exit the PROGRAM Menu without sav-
ing the new site parameters. Use the
appropriate feature key to respond. If
you choose not to save the new site
parameters, the TransPort will keep the
newly entered parameters in RAM. The
new parameters will be lost the next
time you recall or change parameters.
E0: No Error This message appears on the message
line on the screen. This indicates there
is no error (may appear briefly after
another error message). See page 10-3
for more information.
Message Description/Action