User`s manual

December 2003
E-6 Temperature Transmitter Installation
Connecting the Transmitter to the TransPort (cont.)
If you are using your own transmitter, you must connect the
special GE Panametrics cable to your transmitter as shown in
Table E-1.
Once you complete making the above connection, plug the
LEMO connector into the ANALOG I/O connector as shown in
Figure E-1. You have completed RTD installation.
Table E-1: Cable Connections from GE Panametrics
Cable to Customer-Supplied Transmitter
Pin Number on
GE Panametrics
Cable
Wire Color on
GE Panametrics
Cable Description
2 Red 16 V (for
unpowered
transmitters
only)
3 White Supply
Temperature
4 Yellow Return
Temperature
5 Green Ground (for
both supply and
return)