User`s manual

Entering Special Transducer Pipe Parameters A-15

December 2003

Entering Parameters for Wetted Transducers (cont.)

8W. Enter the Axial Length (L)

GE Panametrics has calculated the axial length (L) of the

ultrasonic signal based on the transducer configuration for your

particular application. Find the axial dimension on the flowcell or

from other supplied documentation.

1. Press the appropriate feature key to select the desired units.

2. Use the numeric keys to enter the axial length. Press [ENT].

Note: If the axial length is not supplied, refer to Appendix B to

measure the axial length.

9W. Selecting Tracking Windows

If you want tracking windows:

• Press [F1] for no or

• Press [F2] for yes.

10W. Entering the Fluid Type

Enter the fluid type. You may choose one of the following:

• water

• oil

• methanol

• ethanol

• LN

• freon

• other