User`s manual

December 2003
A-12 Entering Special Transducer Pipe Parameters
Entering Parameters for Wetted Transducers
If you are using wetted transducers, you will see the following
prompts:
• Frequency
• Tw (time delay)
• Pipe OD (pipe outside diameter)
• Pipe Wall
• Path Length (P)
• Axial Dimension (L)
• Tracking Windows
• Fluid Type
• Reynolds Correction Factor
• Calibration Factor
3W. Entering the Frequency
Enter the transducer frequency. The TransPort needs to know the
frequency in order to transmit a voltage at a rate to which the
transducer can respond.
Use the appropriate feature key to select one of the following
choices:
• 500 k
• 1 MHz
• 2 MHz
• 4 MHz