User`s manual

December 2003
9-2 Using the Ultrasonic Thickness Gage
Connecting the Ultrasonic Thickness
Transducer
Plug the ultrasonic thickness transducer into the transducer
connectors located on the top of the TransPort (see Figure 9-1).
Note that the transducer cable plug must be oriented with the
center pin down.
Figure 9-1: Ultrasonic Thickness Transducer
Connections
!WARNING!
When unplugging the transducer, pull on the
molded plug only. Do not pull on the cable.
PWR
RS232
ANALOG I/O
1
6
1
2
XDCR
1
2
4
5
6
7
3
8
Thickness Transducer