Ethernet Extension Experts Enable-IT 864 Ethernet Extender DSLAM User Manual All Rights Reserved 1997 - 2013 ENABLE-IT - Proprietary and Confidential
Copyright © 1997-2013 Enable-IT, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Enable-IT, Inc. Enable-IT, Inc reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of Enable-IT, Inc to provide notification of such revision or change.
CONTENTS ABOUT THIS GUIDE 4 1 INTRODUCING THE ENABLE-IT 864 ETHERNET EXTENDER DSLAM 5 About the 864 ETHERNET EXTENDER DSLAM Key Benefits Summary of Features Typical Use Applications 5 6 6 7 2 INSTALLING THE ENABLE-IT 864 ETHERNET EXTENDER DSLAM Site Plan – Installation Design Considerations Unpacking the 864 ETHERNET EXTENDER DSLAM Perform an out of the box Test Performing the On-Site Installation Mounting the 864 ETHERNET EXTENDER DSLAM Building the 864 Interlink wiring Attaching cabling and devices
ABOUT THIS GUIDE This guide provides all the information needed to install and use the Enable-IT 864 ETHERNET EXTENDER DSLAM. This guide is intended for use by technicians who are responsible for installing and setting up network equipment. Consequently, it is assumed that the installer has a basic working knowledge of LANs (Local Area Networks) and voice telecom wiring.
INTRODUCING THE 864 ETHERNET EXTENDER DSLAM Congratulations on purchasing the Enable-IT’s 864 ETHERNET EXTENDER DSLAM — the simplest method to stretch your broadband solutions for in-building deployment in commercial office buildings, hotels, and multi-tenant residential units. The 864 Extended Ethernet Unit offers the Lowest Cost Solution in a simple design for rapid install using existing 1 pair Telco wiring.
Key Benefits The following list identifies the 864 Extended Ethernet Unit key benefits. Dramatic cost reduction over any competing technology and includes a (4) Port 10/100 LAN switch on each end. Broadband technology that delivers in-building Ethernet access over 1 pair of existing Category 2 up to Category 5e wiring up to 6,000’, whether spare or actively in use for analog or digital voice. This means no new wiring is required.
Typical Use Applications Enable-IT 864 Extended Ethernet Units are usually installed into telephone wiring infrastructures where extension of backbone services is required and expensive fiber options are prohibitive. The 864 Extended Ethernet Units allow a standard Ethernet segment to be deployed quickly over existing 1 pair Telco Copper Wiring in combination with existing POTS voice signals.
INSTALLING THE 864 EXTENDED ETHERNET DSLAM The Enable-IT 864 Extended Ethernet Units have a distance restriction of 6,000ft or 1,828m over 1-pair of Category 2 up to Category 5e / CAT6 wiring from device extension to device extension. Therefore quick, simple site surveys and installation planning are highly recommended. This chapter describes the recommended installation process for the Enable-IT 864 Extended Ethernet Unit.
Unpacking the Enable-IT 864 Extended Ethernet DSLAM Carefully remove the Enable-IT 864 Extended Ethernet DSLAMs all packing materials from the box. Verify that the items listed below are present. Make sure that the equipment supplied matches what you ordered. If any items are missing or damaged, please contact Enable-IT or your distributor for assistance.
Mounting the Enable-IT 862 CPE Extended Ethernet Units The Enable-IT 862 Extended Ethernet CPE’s are designed for quick wall mounting. Choose a location to mount each of the Enable-IT 860’s where the maximum distance does not exceed 6,000ft or 1,829m total between devices to be connected. When wallmounting the Enable-IT 862 Extended Ethernet CPE’s it is recommended that you use the appropriate screw anchors for your mounting surface.
For troubleshooting, first examine the backbone wiring pair and make sure you have solid connections. The Interlink Sync LED will be lit solid Green with rapid pulsing on each 864 unit to show proper connection and pairing. If the Interlink Sync LED Link is flashing slow to fast and never goes solid …. Then follow the steps below: 1) Make sure your wiring is straight through and not connected to any Telco punch down block; If so remove from the block and use Telco butt clips to bridge wire.
TECHNICAL SUPPORT Enable-IT, Inc.’s Customer Care Team support is available directly to customers and distributors. All support requests are processed through the online support portal. This allows us to provide assigned support ticket numbers in order to bring closure to any technical issues. Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one.
ENABLE-IT, INC. LIMITED WARRANTY Enable-IT, Inc. warrants the Enable-IT 860 Pro Ethernet Extender Kit solely pursuant to the following terms and conditions. 1. PRODUCT WARRANTY. a. Express Warranty. Enable-IT warrants to the original purchaser of the Product ("you" or the "End User") that, for the four (4) year period commencing on the date the Product was purchased (the "Warranty Period"), the Product will be substantially free from defects in materials and workmanship under normal use and conditions.
DISCLAIMS, TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS. NO PERSON (INCLUDING WITHOUT LIMITATION, ENABLE-IT’S EMPLOYEES, AGENTS, RESELLERS, OEMS OR DISTRIBUTORS) IS AUTHORIZED TO MAKE ANY OTHER WARRANTY OR REPRESENTATION CONCERNING THE PRODUCT.
CONTACT US Sales and Customer Care: Toll Free US and Canada 888 309-0910 866 389-8605 Fax Other International +1 702 924-0402 +1 702 800-2711 Fax E Mail sales@enableit.com support@enableit.com RMA Support: http://support.enableit.
