User manual



Key Benefits

The following list identifies the 860 Pro Ethernet Extender Kit key benefits.

 Dramatic cost reduction over any competing technology and includes a 4-Port

10/100 LAN switch on each end. Rapid installation with small box profile, no

programming and no firmware to upgrade

 Broadband technology that delivers in-building Ethernet access over 1-pair of

existing Category 2, up to Category 5e, 6 or 7, wiring at a maximum distance of

6,000ft (1,829m). Existing spare or actively in use for analog wiring can be used

as well. This means no new wiring is required.

 Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and

virtual private networking (VPN).

 Low profile box capable of supporting dual POTS lines and Ethernet data all in a

single RJ-45 Ethernet jack (Interlink port). At time of ordering, or afterwards, a

RJ-45 dongle can be requested to use on RJ-11 telephone wiring.

 Quad switched RJ-45 10/100 LAN Ethernet ports for expansion without adding a

hub or switch on each end.

Summary Of Features



The Enable-IT 860 Pro Ethernet Extender Kit has the following hardware features:

 Extended Ethernet line over existing CAT2 up to CAT5e / CAT7 wiring

 Uses RJ-45 Interlink port for transport (dual voice, 100Mbps data and PoE)

 Rapid Telco style installation – no programming required

 Supports digital VoD channels and maintains existing telephone (lifeline POTS)

 Drives Ethernet 100Mbps Full-Duplex service delivery with quad LAN switch,

dual voice up to 6,000ft (1,829m) - can also transport PoE up to 2,500ft natively.

 Network equipment independence – transparent to protocols/applications/MAC

Specifications: Functionality:

Power Indicator Data Rates 10/100Mbps Full-Duplex

100Mbps Link Status/Activity Full-Duplex/Half-Duplex Status/Collisions

VDSL2 Link Status/Activity Protocol independent

Physical Dimensions: 860 Pro Interlink port:

Height: 1.5" (38.1mm) Pins 1 & 2 – Voice line 1 and Ethernet data

Depth: 3.5" (88.9mm) Pins 3 & 6 – Voice line 2 (optional)

Width: 4.26” (108.2mm) Pins 4 & 5 – optional support for PoE

Weight: .4lbs (6.4oz) 2.5lbs Pins 7 & 8 – optional support for PoE

Environment: Interfaces:

Operating temp: -49°F to 168°F (-45°C to 76°C) (1) 5v 2A DC Power Adapter 2.1mm

Storage temp: -49°F to 168°F (-45°C to 76°C) (4) RJ-45 100Mbps LAN Auto negotiate

Humidity 5% to 95%, non-condensing (1) RJ-45 Interlink port

(1) Phoenix Connector for PoE Input

Optional Dongle:

RJ-45 Male Head: Pins 1 & 2 – Voice line 1 and data

Pins 3 & 6 – Voice line 2 and data

RJ-11 Sockets: Pins 2 & 3 – VDLS2 & Phone port – Voice line 1 and data

Pins 1 & 4 – Voice line 2