User manual

ManualsBrandsEnable-IT ManualsComputer equipment860 Series

A l l R i g h t s R e s e r v e d 1 9 9 7 - 2 0 0 8 E

N A B L E

-I T

 - P r o p r i e t a r y a n d C o n f i d e n t i a l

E n a b le -I T 89 0 Se ries

E xten d e d E th e rn e t

U ser Man u a l



Summary of content (14 pages)

PAGE 2
Copyright © 1997- 2008 Enable-IT, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Enable-IT, Inc. Enable-IT, Inc reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of Enable-IT, Inc to provide notification of such revision or change.
PAGE 3
CONTENTS ABOUT THIS GUIDE 4 1 INTRODUCING THE ENABLE-IT 890 EXTENDED ETHERNET KIT 5 About the 890 Extended Ethernet Kit Key Benefits Summary of Features Typical Applications 2 INSTALLING THE ENABLE-IT 890 EXTENDED ETHERNET KIT Site Plan – Installation Design Considerations Unpacking the 890 Extended Ethernet Kit Performing the On-Site Installation Mounting the 890 Extended Ethernet Units 5 6 6 7 8 8 8 9 9 A TECHNICAL SUPPORT Online Technical Services World Wide Web Site Returning Products for Repair
PAGE 4
ABOUT THIS GUIDE This guide provides all the information needed to install and use the Enable-IT 890 Extended Ethernet Kit. This guide is intended for use by technicians who are responsible for installing and setting up network equipment. Consequently, it is assumed that the installer has a basic working knowledge of LANs (Local Area Networks) and voice telecom wiring.
PAGE 5
INTRODUCING THE 890 EXTENDED ETHERNET KIT Congratulations on purchasing the Enable-IT’s 890 Extended Ethernet Kit — the simplest method to stretch your broadband solutions for in-building deployment in commercial office buildings, hotels, and multi-tenant residential units. The 890 Extended Ethernet Kit offers the Lowest Cost Solution in a simple design for rapid install using existing 1 pair Telco wiring.
PAGE 6
Key Benefits The following list identifies the 890 Extended Ethernet Kit key benefits. • Dramatic cost reduction over any competing technology. • Broadband technology that delivers in-building Ethernet access over 1 pair of existing Category 2 up to Category 5e wiring up to 6,000’, whether spare or actively in use for analog or digital voice. This means no new wiring is required. • Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
PAGE 7
Typical Applications Enable-IT 890 Extended Ethernet Units are usually installed into telephone wiring infrastructures where extension of backbone services is required and expensive fiber options are prohibitive. The 890 Extended Ethernet Kits allow a standard Ethernet segment to be deployed quickly over existing 1 pair Telco Copper Wiring in combination with existing POTS voice signals. The innermost pins (2 & 3) are used for transport for both voice and data.
PAGE 8
INSTALLING THE 890 EXTENDED ETHERNET UNITS The Enable-IT 890 Extended Ethernet Kits have a distance restriction of 6,000ft or 1,829m over 1-pair of Category 2 up to Category 5e wiring from device extension to device extension. Therefore quick, simple site surveys and installation planning are highly recommended. This chapter describes the recommended installation process for the Enable-IT 890 Extended Ethernet Units.
PAGE 9
Unpacking the Enable-IT 890 Extended Ethernet Kit Carefully remove the Enable-IT 890 Extended Ethernet Units all packing materials from the box. Verify that the items listed below are present. Make sure that the equipment supplied matches what you ordered. If any items are missing or damaged, please contact your Enable-IT or your distributor for assistance.
PAGE 10
 Prior to performing a remote link install, test your setup and equipment. Connect your LAN to the Ethernet port of the primary 890 unit and power adapter. Using the provided telephone patch cord, connect each end of the cord into the Line port on both 890 units. Connect your remote end device to the Ethernet port of the remote 890 unit and power adapter. Power on all equipment and test your connectivity and throughput. The Power, Activity and Link lights will initially come on.
PAGE 11
Technical Support Enable-IT OEM Technical Support is available directly to customers and distributors. All support requests are processed through the online support portal. This allows us to provide assigned support ticket numbers in order to bring closure to any technical issues. Online Technical Services The Enable-IT Support Portal is available 24/7. No password or user account is necessary.
PAGE 12
ENABLE-IT LIMITED WARRANTY Enable-IT warrants the Enable-IT 860 Extended Ethernet Kits solely pursuant to the following terms and conditions. 1. PRODUCT WARRANTY a. Express Warranty Enable-IT warrants to the original purchaser of the Product ("you" or the "End User") that, for the one (1) year period commencing on the date the Product was purchased (the "Warranty Period"), the Product will be substantially free from defects in materials and workmanship under normal use and conditions.
PAGE 13
e. Warranty Disclaimers THE EXPRESS WARRANTY SET FORTH ABOVE IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL, EXPRESS OR IMPLIED. ENABLE-IT DISCLAIMS, TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS. NO PERSON (INCLUDING WITHOUT LIMITATION, ENABLE-IT’ EMPLOYEES, AGENTS, RESELLERS, OEMS OR DISTRIBUTORS) IS AUTHORIZED TO MAKE ANY OTHER WARRANTY OR REPRESENTATION CONCERNING THE PRODUCT.
PAGE 14
CONTACT US European Sales: +44 1 908 560200 +44 1 908 565533 fax http://www.enable-it.eu sales@enable-it.eu North American Sales: +1 888 309-0910 +1 866 389-8605 fax http://www.enableit.com sales@enableit.com Middle East Sales: +971-50-435-8310 http://www.enableit.com sales@enableit.com Other International: +1(619) 795-1697 +1 320-215-6907 fax Page 14 of 14 Asia Pacific Sales: +61 02 8898-9622 +61 2 9939-0005 fax http://www.enable-it.com.au sales@enable-it.com.