Specifications
Table Of Contents
- General Information
- About This Manual
- CHP 1: Introduction to the SD17063
- CHP 2: Specifications
- CHP 3: SD17063 Switch Settings
- SD17063 Worksheet
- Choosing Your Motor
- Location of Programming Switches
- DIP Switch Settings
- Self Test
- CHP 4: General Installation Guidelines
- CHP 5: Installing the SD17063 Rev. B
- APX A: Choosing Your Motor
- APX B: Upgrading to the SD17063 Rev. B
- APX C: Troubleshooting
INTRODUCTION
ADVANCED MICRO CONTROLS INC.
1
8
Other Products From AMCI
AMCI has been serving the industrial automation sector since 1985, and we have a broad range of other prod-
ucts that are used in industrial applications.
h DURACODERS:
Absolute, Analog, or Incremental encoders that replace the fragile glass disk and sen-
sitive optics of optical encoders with an industrial resolver. The size 25 DuraCoders are drop in replace-
ments for similar sized optical encoders. In motion applications, a DuraCoder is typically used for
position feedback.
h PLC PLUG-IN MODULES:
AMCI offers a broad range of PLC plug-in modules for most major PLC
brands including A-B ControlLogix, SLC500 and 1771 I/O, GE Fanuc 90-70 and 90-30, and Modicon
Quantum. Modules include resolver, LDT, and SSI interfaces, programmable limit switches, indexers
and registration control modules.
h RESOLVER TRANSDUCERS:
AMCI is the only company in the market place to manufacturer its own
resolvers. Not only do we make the resolvers for our own products, we also produce resolvers with dif-
ferent electrical specifications for other position feedback applications such as servo control.
For additional information on these items and the rest of our product lines, browse through our website
www.amci.com, or contact AMCI or your local AMCI distributor.