Specifications

INTRODUCTION
ADVANCED MICRO CONTROLS INC.
1
6
The SD17063 Rev. B With DuraDrive Technology
AMCI’s SD17063 is an advanced, high-power microstepping drive for NEMA 17 through NEMA 42 frame
size motors. The drives many features include:
h
DuraDrive Technology protects the drive from extremes in temperature, input voltage, and motor regen-
eration currents.
h
Self Test
h
Programmable RMS or Peak motor current control
h
Detection of nine different faults
h
Reset and Disable inputs
h
Programmable Idle Current Reduction
h
Programmable Current Loop Gain
h
Programmable Motor Anti-resonance feature
h
Programmable Output Waveform in microstepping applications
Connections to the indexer are made through opto-isolated differential inputs. Differential inputs have greater
noise immunity than single ended inputs. This means you can run longer cables, (up to 300 feet), from the
indexer to the SD17063, and place the drive closer to the motor. A shorter motor cable means less power loss
from cable resistance, which means more torque from the motor.
What’s Included in the Drive Package
The following table lists the items included with the SD17063 Rev. B drive when shipped from AMCI. If you
don’t have all of these parts, contact your distributor or AMCI for help.
Table 1.1 SD17063 Ship List
Description AMCI Part Number
Stepper Drive SD17063 Rev. B
Indexer Connector MS-10WP
Motor Connector w/ Rubber Boot MC-1
Power Connector w/ Rubber Boot PC-1
Screwdriver 890-90303