Specifications
Table Of Contents
- General Information
- About This Manual
- CHP 1: Introduction to the SD17063
- CHP 2: Specifications
- CHP 3: SD17063 Switch Settings
- SD17063 Worksheet
- Choosing Your Motor
- Location of Programming Switches
- DIP Switch Settings
- Self Test
- CHP 4: General Installation Guidelines
- CHP 5: Installing the SD17063 Rev. B
- APX A: Choosing Your Motor
- APX B: Upgrading to the SD17063 Rev. B
- APX C: Troubleshooting
ABOUT THIS MANUAL
ADVANCED MICRO CONTROLS INC.
4
Revision Record
This manual, 940-0S013, is the fourth revision of this manual. This revision clarifies some drawings, adds
information on disabling Anti-resonance when using the drive’s self test, and adds information on converting
from an SD8055 to the SD17063 Rev. B. It was first released March 8
th
, 2002.
Revision History
940-0S012: 04/05/2001. Update for Rev. B drive.
940-0S011: 05/21/2000. Update for Rev. A drive
940-0S010: 06/02/1998. Initial Release.
Where To Go From Here
This manual contains information that is of interest to everyone from engineers to operators. The table below
gives a brief description of each chapter’s contents to help you find the information you need to do your job.
Table 0.1 Chapter Index
As a first step, consider photocopying the SD17063 Worksheet found on page 17. The worksheet gives space
to write down all of your setup decisions in one place.
CHP
Num.
Chapter Title Intended Audience
1
INTRODUCTION TO
THE SD17063
Anyone new to the SD17063. This chapter gives a basic overview of
the features available on the unit, typical applications, and comple-
mentary equipment.
2
SPECIFICATIONS
Anyone that needs detailed information on the drive itself.
3
SD17063 SWITCH
SETTINGS
Anyone that must determine switch settings when installing the
SD17063.
4
GENERAL
INSTALLATION
GUIDELINES
Anyone new to installing electronic controls in an industrial environ-
ment. The chapter includes general information on grounding, wir-
ing, and surge suppression that is applicable to any controls
installation.
5
INSTALLING THE
SD17063 REV B.
Anyone that must install a SD17063 on a machine. Includes informa-
tion on mounting, grounding, and wiring specific to the unit. The
chapter also gives guidelines for testing the system once it’s installed.
APX A
CHOOSING YOUR
MOTOR
Anyone that must choose a motor for an application.
APX B
UPGRADING TO THE
SD17063 REV. B
Anyone that is upgrading to the SD17063 Rev. B from AMCI’s
SD8055 or older SD17063’s.
APX C
TROUBLESHOOTING
Anyone that needs a concise reference of potential problem symptoms
and thier solutions.