Ethernet Extension Experts Enable-IT 850 CPE Ethernet Extender User Manual All Rights Reserved 1997 - 2011 ENABLE-IT - Proprietary and Confidential
Copyright © 1997-2011 Enable-IT, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Enable-IT, Inc. Enable-IT, Inc reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of Enable-IT, Inc to provide notification of such revision or change.
CONTENTS ABOUT THIS GUIDE 4 1 INTRODUCING THE ENABLE-IT 850 CPE ETHERNET EXTENDER 5 About the 850 CPE Ethernet Extender Key Benefits Summary of Features Typical Use Applications 5 6 6 7 2 INSTALLING THE ENABLE-IT 850 CPE ETHERNET EXTENDER Site Plan – Installation Design Considerations Unpacking the 850 CPE Ethernet Extender Perform an out of the box Test Performing the On-Site Installation Building the 850 CPE Interlink wiring Attaching cabling and devices Troubleshooting & Performance Settings (DIP s
ABOUT THIS GUIDE This guide provides all the information needed to install and use the Enable-IT 850 CPE Ethernet Extender Kit. This guide is intended for use by technicians who are responsible for installing and setting up network equipment. Consequently, it is assumed that the installer has a basic working knowledge of LANs (Local Area Networks) and voice telecom wiring.
INTRODUCING THE 850 CPE ETHERNET EXTENDER Congratulations on purchasing the Enable-IT’s 850 CPE Ethernet Extender — the simplest method to stretch your broadband solutions for in-building deployment in commercial office buildings, hotels, and multi-tenant residential units. The 850 CPE Extended Ethernet Unit offers the Lowest Cost Solution in a simple design for rapid install using existing 1 pair Telco wiring.
Key Benefits The following list identifies the 850 CPE Extended Ethernet Unit key benefits. • Dramatic cost reduction over any competing technology and includes a (4) Port 10/100 LAN switch on each end. • Broadband technology that delivers in-building Ethernet access over 1 pair of existing Category 2 up to Category 5e wiring up to 8,000’, whether spare or actively in use for analog or digital voice. This means no new wiring is required.
Typical Use Applications Enable-IT 850 CPE Extended Ethernet Units are usually installed into telephone wiring infrastructures where extension of backbone services is required and expensive fiber options are prohibitive. The 850 CPE Extended Ethernet Units allow a standard Ethernet segment to be deployed quickly over existing 1 pair Telco Copper Wiring in combination with existing POTS voice signals.
INSTALLING THE 850 CPE EXTENDED ETHERNET The Enable-IT 850 CPE Extended Ethernet Units have a distance restriction of 8,000ft or 2,440m over 1-pair of Category 2 up to Category 5e / CAT6 wiring from device extension to device extension. Therefore quick, simple site surveys and installation planning are highly recommended. This chapter describes the recommended installation process for the Enable-IT 850 CPE Extended Ethernet Unit.
Perform an out of the box Test We highly recommend a quick test to ensure the working order of you 850 CPE units. To do this, please use one of the Telephone patch cords provided and attach to the 850 CPE Interlink port and then to the 8950 DSLAM Interlink port. Power up both 850 CPE units and the 8950 DSLAM Concentrator. The Green Sync LEDs will start flickering slowly and then fast as the units talk to eachother.
line 2 and the remaining pins 4,5,7 & 8 are can transport native PoE or are unused. Attaching cabling and devices to the Enable-IT 850 CPE Extended Ethernet. Attach your remote LAN device to the 850 CPE unit LAN ports with Ethernet patch cord provided. Attach your local LAN to the 8950 DSLAM LAN ports with Ethernet patch cord provided. Attach the power adapter to the 850 CPE units and power supply to the 8950 DSLAM. Your equipment should now be powered up and functioning.
Online Technical Services The Enable-IT Support Portal is available 24/7. No password or user account is necessary. Please use this support website as your first source for help as it contains an on line knowledge base of articles, documentation, FAQ's and other problem-solving resources. This web-based support resource provides the quickest solution to the most common technical support issues. http://support.enableit.com Returning Products for Warranty Repair Enable-IT, Inc.
reconditioned Product provided pursuant to this paragraph is warranted as provided herein for the remainder of the original Warranty Period. THE REMEDY SET FORTH IN THIS PARAGRAPH SHALL BE THE END USER’S SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE FOREGOING WARRANTY. c.
PROFIT, USE, DATA, OR OTHER ECONOMIC ADVANTAGE), HOWEVER IT ARISES, INCLUDING WITHOUT LIMITATION BREACH OF WARRANTY, OR IN CONTRACT OR IN TORT (INCLUDING NEGLIGENCE), OR STRICT LIABILITY, EVEN IF ENABLE-IT HAS BEEN PREVIOUSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND EVEN IF A LIMITED REMEDY SET FORTH IN THIS AGREEMENT FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL ENABLE-IT’ LIABILITY TO THE END USER OR ANY THIRD PARTY EXCEED THE PRICE PAID FOR THE PRODUCT.
