Specifications

Chapter 1: Connections and Setup
Illustrations contained in this document are for representation only.
1
Introduction
Residential Voice Gateway Features
z Support Multiple Provisioning Mode
z Standard RJ-45 connector for 10/100BaseT Ethernet with auto-negotiation and MDIS
functions
z USB Connector for USB interface
z Two RJ-11 Foreign Exchange Station (FXS) ports for IP telephony
z Support simultaneous voice and data communications
z Two simultaneous voice conversations in the different FXS ports with different CODEC:
PCM A-law, PCM-law, G.723.1, G.729, G.729a, G.729e, G.728, G.726, BV16 and BV32
z Echo Cancellation
z Voice Active Detection (VAD)
z DTMF detection and generation
z Comfort Noise Generation (CNG)
z Support V.90 fax and modem services
z Transparent bridging for IP traffic
z RSA and 56 bit DES data encryption security
z SNMP network management support
z Remote operating firmware downloading
z Support Web pages and private DHCP server for status monitoring
z Clear LED display
z Plug and Play
What’s on the CD-ROM
Insert the Residential Voice Gateway CD-ROM into your CD-ROM drive to view troubleshooting
tips, the internal diagnostics, and other valuable information.
Note: You might need to use the CD-ROM to install the USB driver if you are connecting via the
USB port.