Specifications

Chapter 2: Web Configuration
44
Fragmentation Threshold:
Set the number of the fragmenting frames to make the data to be delivered without errors
induced by the interference. Frames longer than the value you set here are fragmented
before the initial transmission into fragments no longer than the value of the threshold.
RTS Threshold:
Set the value for sending a request to the destination. All the frames of a length greater
than the threshold that you set here will be sent with the four-way frame exchange. And, a
length less than or equal to the value that you set will not be proceeded by RTS.
Apply:
After proper configuration, click Apply to invoke the settings.
Bridging
This page allows you to configure the WDS features.
WDS (Wireless Distribution System) is a system that enables the interconnection of access points
wirelessly. It may also be referred to as repeater mode because it appears to bridge and accept
wireless clients at the same time (unlike traditional bridging).
Wireless Bridging:
Choose Disabled to shutdown this function; select Enabled to turn on the function of WDS.
Remote Bridges:
Enter the MAC Addresses of the remote Bridges to relay the signals for each other.
Apply:
After proper configuration, click Apply to invoke the settings.