Specifications

Chapter 2: Web Configuration
Illustrations contained in this document are for representation only.
33
To make sure that you can access the Internet successfully, please check the following first.
1. Make sure the connection (through Ethernet or USB) between the Residential Voice
Gateway and your computer is OK.
2. Make sure the TCP/IP protocol is set properly.
3. Subscribe to a Cable Company.
Accessing the Internet
Once your host PC is properly configured; please proceed as follows:
1. Start your web browser and type the private IP address of the Residential Voice Gateway
on the URL field: 192.168.0.1.
2. After connecting to the device, you will be prompted to enter username and password.
By default, the username is “ ” and the password is “admin”.
If you login successfully, the main page will appear. From now on this Residential Voice Gateway
acts as a web server sending HTML pages according to your request. You can configure the
settings on the webpage and apply them to the device.