Specifications

Chapter 1: Connections and Setup
10
Rear Panel
TEL1 & TEL2 Telephony RJ-11 connector
ETHERNET 1-4: Ethernet 10/100BaseT RJ-45 connector
USB: USB Connector
REBOOT EMTA: Reboot this Residential Voice Gateway
CABLE: F-Connector
Rating 100-240V: Power connector
Installing the Battery
This section provides you information of installing batteries into the modem. Follow the steps
below:
1. Unplug the power cord of the power adapter from the modem if you have plugged it.
2. Remove the cover of the rear panel. There are two spare drives for you to install the
battery.