Product guide
v4.5 - 12.18 .14 |
8
BACK TO T.O.C.
OVERVIEW
The TeleBoss 830 is a versatile, mid-range system for monitoring and control of remote telecom-centric equipment sites.
The T830 facilitates data collection and TELEMANAGEMENT of CPE and co-located telecom equipment and other types of
devices located at remote sites. The T830 facilitates monitoring of serial ports, equipment I/O, and environmental conditions
at these remote sites, with notication when conditions fall outside limits. On-board I/O provides serial, Ethernet, and
dialup connectivity. The T830-2 and -6 models provide two or six expansion slots respectively to allow addition of various
communications and monitoring I/O interfaces that might be desired for your specic site application.
IDEAL USES
1) Call Accounting - PBX CDR/SMDR data collection via either a serial port or via an Ethernet connection to the PBX. Via
Ethernet, the T830 can collect data from Avaya, Alcatel, Mitel, Nortel, and Cisco switches. Once stored in the T830’s non-
volatile memory, data can be delivered via FTP or modem to a call accounting application.
2) PBX Alarm Monitoring - The T830 can gather ASCII-based PBX alarms via a serial connection from PBX’s or other
devices.
BACK PANEL CONFIGURATION
The T830 catalog number species the conguration and options you want to order with your T830 unit. The catalog number
lists the options in the order shown below. Items with a * are truly optional and are omitted if not desired.
BASE UNIT + *EXTENDED TEMP + MEMORY SIZE + *MODEM + *TEMP SENSOR +
POWER SUPPLY + *EXPANSION CARDS
Base unit and base options are separated with a slash ( / ), then Expansion slot options are listed, separated with a dash ( - ).
The rst Expansion card listed in the catalog number goes in slot 1, the next in slot 2, and so on. Thus all of the following are
valid catalog numbers:
ADDITIONAL PRODUCT DETAILS
Unit comes with AC Desktop Power Supply with US-type IEC power cord, (2) 6ft RJ45 serial cables, (1) RJ45-DB9F DCE
Adapter, (1) RJ45-DB9M DTE Adapter, (1) DB9 M/F Null Modem Adapter, (2) 19” rack mount ears, and a documentation and
utilities CD. Expansion cards come with appropriate accessories. For example the 4X serial cards come with (4) 6ft RJ45 serial
cables and (4) RJ45-DB9M DTE Adapters. The wireless modem cards come with an antenna. Contact Sales for more details.
VERSATILE CPE MANAGEMENT AND CDR COLLECTION
DEVICE SPECIFICATIONS
• Unit Width: 7.5-17.5in / 19.05-44.45cm
• Unit Height: 1.75in / 4.445cm
• Unit Depth: 7.25-7.8in / 18.415-19.812cm
• Unit Weight - dependent on
cong.: 3-5lbs / 1.36-2.27kg
• Mounting: Shelf or 19in rack
• Power: 15 VDC, 24 and 48VDC optional
• ROHS / CE / CSA Certication: Yes
• Power Consumption: Typical:5.25W /
Max:24W
• BTUs (Nominal): 18 BTU/Hr / Max: 82
BTU/Hr
• Operating Temperature: 0-40° C
• Storage Temperature: -40° to +85° C
• Humidity: Operating: 10-80%
Storage: 0-95%
• Mean Time Between Failure: 70,000 hr
PRICING
TeleBoss 830 with 0 Expansion Card Slots
(T830-0)..............................................$1,695
TeleBoss 830 with 2 Expansion Card Slots
(T830-2).............................................$1,895
TeleBoss 830 with 6 Expansion Card Slots
(T830-6).............................................$2,195
Options:
Extended Temperature Range (/XT**)...$150
32MB Record Storage (/32M)........Included
64MB Record Storage (/64M)..............$450
Dial-up Modem (/MD)...........................$200
On-board Temp Sensor (/T)....................$50
AC Supply for US (/ACUS***)........Included
24VDC Power (/24DC****)....................$150
48VDC Power (/DC****).........................$150
Run-time Battery (/BB****)....................$200
• T830-0/32M/ACUS
• T830-0/32M/MD/ACUS
• T830-0/32M/MD/T/ACUS
• T830-2/64M/MD/ACUS/BB
• T830-2/32M/MD/DC
• T830-2/64M/MD/T/ACUS-4S-ME
• T830-6/32M/ACUS-8V-8R-8C-8C
• T830-6/32M/MD/ACEU-8C-4C4V
• T830-6/64M/MD/T/ACUS-8V-8R-8C
FEATURED BENEFITS
• Collect SMDR / CDR / Trafc / ACD
• Data polling via Telnet, FTP Push,
Dialup
• Remote maintenance port access
• Terminal server functions
• PBX alarm notication
• Toll fraud detection and alarms
• Equipment / environmental alarms
• Intelligent ASCII evaluation alarms
• No-data / Percentage-full alarms
• SNMP traps / dialout alarms
• SNMP Gets
• Supports up to 16 serial ports
• Wireless cellular, ADSL, and/or dialup
modem options
• Equipment / Environmental sensor
options
• Optional run-time battery / DC power
options
TeleBoss
TM
830
T830-6 BACK PANEL
EXPANSION SLOT 1EXPANSION SLOT 2
RESET
MODEM SERIAL ETHERNET
PWR
EXPANSION SLOT 3EXPANSION SLOT 5
EXPANSION SLOT 4EXPANSION SLOT 6
DIP SW SENSOR
OPTIONAL BATTERY
OR DC POWER
MMC I/O
T830-2 BACK PANEL
OPTIONAL BATTERY
OR DC POWER
EXPANSION SLOT 1EXPANSION SLOT 2
RESET
MODEM I/0 2 I/0 1
ETH2 ETH1
SERIAL
ETHERNET
DIP SW
SENSOR
PWR
MMC I/O
** Standard operating temperature is 0
to +40°C. /XT option extends operating
temperature to -40 to +60°C. Extended-
temperature AC power supply included when
ordering /AC with /XT option.
*** For International usage you can specify /
ACUK, /ACEU, or /ACAU for UK, European, or
Australian power supplies respectively.
**** When determining your T830 conguration,
you may choose either DC Power or Run-time
Battery, but not both.