Product guide

v4.5 - 12.18 .14 |
23
BACK TO T.O.C.
Appearance of device received may differ from the device pictured
WATER SENSOR
Use this device to detect water
accumulation or leakage. When
water or water-based  uids come into
contact with this device, it signals
by closing its contact outputs. The
Water Sensor works with any Asentria
contact-closure input.
Note: Older Asentria base units require
the use of a Water Sensor Adaptor to
provide power for the water sensors.
This adaptor provides power and
contact connections for up to 4 water
sensors. Water Sensor Adapters
require external 15VDC power; or
they can be powered directly from an EventSensor port. You can daisy-chain
water sensor adapters together with EventSensor RJ45 cables to create a
comprehensive water monitoring solution.
Newer base units can power the water sensor directly from the contact-closure
inputs, without a water sensor adaptor.
Environmental Monitoring EventSensors
Water
Sensor
Sensor
Adapter
EVENTSENSOR
™
COUPLER/ADAPTERS AND CABLES
SensorJack and EventSensor sensors can be chained, split, and extended
with EventSensor RJ45 connectors and RJ45 cables. Up to 16 sensors can be
chained to a single SensorJack or EventSensor port on the Asentria base unit.
Use EventSensor RJ45 cables to extend the reach of your SensorJack and
EventSensor environment sensors. Maximum total length of each sensor cable
chain is 100 feet. If your Asentria base unit has a mini-DIN style EventSensor
port, you must use the ES-CAB8 cable to adapt to the RJ45-style EventSensor
port. Note: EventSensor cable is standard CAT5e Ethernet cable.
If your Environmental EventSensor requires external power, see “Miscellaneous
Accessories” section for Power Supplies and Cords. Power outputs available in 12,
15, 24, and -48VDC.
DESCRIPTION CODE PRICE
RJ45 Coupler 4162-007 $3
RJ45 Splitter 4162-011 $4
Extra SensorJack Probe-End Install Kit 5006-007 $3
EventSensor RJ45 cable, 1 FT 2065-101 $3
EventSensor RJ45 cable, 6 FT 2065-020 $5
EventSensor RJ45 cable, 14 FT 2065-014 $10
EventSensor RJ45 cable, 25 FT 2065-025 $15
EventSensor RJ45 cable, 50 FT 2065-050 $25
EventSensor RJ45 cable, 100 FT 2065-100 $40
ES Adapter (9-pin Mini-DIN to RJ45) ES-CAB8 $25
SMOKE/FIRE ALARM
This smoke sensor/alarm monitors for the presence of
smoke and/or  re. When detected, it sounds an alarm
and closes a form C contact for remote sensing by an
Asentria base unit. The sensor requires external power,
not supplied. Uses 9VDC alkaline battery for backup
power. Indoor use only.
• Coverage area: 150m² (1600 sq. ft)
• Alarm: 3100Hz, 90dBA at 3m
DESCRIPTION CODE PRICE
Smoke Alarm 120VAC ESC-SM1 $90
Smoke Alarm 240VAC ESC-SM2 $115
Smoke Detector 12-24VDC ESC-SM3 $40
Add 5’ wiring kit /K5 $10
Add 25’ wiring kit /K25 $15
Add 50’ wiring kit /K50 $25
Add 15VDC power supply /P15 $80
Example part number: ESC/SM1/K25/P15
• Operating temperature: 0 to 40°C
DESCRIPTION CODE PRICE
Water Sensor* ESC-WS1 $30
Absence of Water Detector ESC-WS2 $122
Water Sensor Adapter Kit - inc. power & cables 4162-008 $55
Add 5’ wiring kit /K5 $10
Add 25’ wiring kit /K25 $15
Add 50’ wiring kit /K50 $25
Example part number: ESC-WS1/K25
AIR-FLOW SENSOR
The air- ow sensor will indicate via a contact
closure if the air ow of a fan goes above
or below a rate of 8.2 ft/s. This is useful for
determining the loss of AC to server and
equipment rooms, potentially triggering an
overheating situation.
DESCRIPTION CODE PRICE
Air Flow Sensor ESC-AF1 $95
Add 5’ wiring kit /K5 $10
Add 25’ wiring kit /K25 $15
Add 50’ wiring kit /K50 $25
Example part number: ESC-AF1/K50
*The ESC-WS1 Water Sensor does not include the adapter.