Product guide

v4.5 - 12.18 .14 |
21
BACK TO T.O.C.
EventSensor I/O Expansion
DESCRIPTION CODE PRICE
8 Port SensorJack Hub ESJ-HUB $180
Add DIN Rail Mount /DIN $10
ESJ-HUB - SensorJack Expansion Hub
IDEAL USE
This wired 8-port hub device has 7 ESJ (SensorJack) output ports, one of which
is a combination ES/ESJ Type 2 port. Each port can support a chain of ESJ
devices (or a chain of ES Type 2 devices on the ES/ESJ port). You can use this
hub to extend the number and reach of ESJ and/or ES Type 2 sensor peripherals
connected to a single Asentria base unit port.
Note that each Site Controller unit is limited to a combined total of 16 ESJ and/or
ES devices. EventSensor cables sold separately. Device comes with screw mounts.
ESJ-HUB Left Side
ESJ-HUB Right Side
CCS-32, CCS-16 - Input Contact Splitters
DESCRIPTION CODE PRICE
16 Contact-Closure Splitter CCS-16 $280
32 Contact-Closure Splitter with Amphenol CCS-32 $560
AC Desktop Power Supply for US /ACUS** Included
48VDC Power /DC Included
Add DIN rail mount /DIN $10
Example part number: CCS-32/DC, CCS-16/ACUS/DIN
IDEAL USE
Input contact splitters allow a
second monitoring unit to be
incorporated into an existing
contact monitoring system
without disturbance. Each
contact input is split into 2
contact outputs thus retaining
the capability and function of the
existing legacy system.
The CCS-16 is compatible with standard contact-closure inputs on any Asentria
base unit, Expansion card, or EventSensor peripheral. It requires external power;
either -48VDC direct, or 15VDC via AC desktop power supply.
The CCS-32 is compatible with Asentria 64C and 32C8V8R high-density I/O
expansion cards. It requires external power; either -48VDC direct, or 10-28VDC
via AC desktop power supply with Phoenix connector.
** For International usage you can specify /ACUK, /ACEU, or /ACAU for UK,
European, or Australian power cords respectively.
CCS-16
CCS-16 Power
CCS-32 Power
CCS-32