Product guide

v4.5 - 12.18 .14 |
20
BACK TO T.O.C.
EventSensor I/O Expansion
IDEAL USE
In remote equipment cabinets for adding additional I/O points to a base SiteBoss
unit either to more perfectly match the number of I/O points needed, or to
give future scalability to add more I/O points should they become needed.
EventSensors can also be used to monitor environmental variables at some
distance from an Asentria base unit in a remote equipment enclosure.
To connect a second EventSensor to the  rst EventSensor in a daisy chain
fashion, you can use our EventSensor cables (See miscellaneous accessories
section), or a standard CAT5E Ethernet cable. For  ve or more linear EventSensor
connections, be sure to check power usage requirements.
• Dimensions: 3.25 x 5.375 x 1.125 Inches / 8.26 x 13.65 x 2.86 Centimeters
• Operating Temperature: -25 to +85° C
• I/O terminal block: 16 pin pluggable type
• Communication port type: RJ45 “SensorJack”, proprietary RS485, full duplex
• Power Usage: 30mA at 15 VDC
ADDITIONAL PRODUCT DETAILS
EventSensor items are catalog line items separate from the base units they will be
connected to. Thus they should be listed on a separate line in your speci cation or
purchase order.
ES-I/O Contact Panel
IDEAL USE
EventSensor ES-CCU32 and ES-CCU64 are modular, add-on environmental
monitoring equipment that employ 32/64 discrete contact closure inputs to
monitor a variety of sensors and legacy devices. The CCU reaches deep into your
remote or unmanned equipment rooms to monitor devices such as UPS units, air
conditioning units, MUXs and PBXs, and other equipment considered critical to
your business. When combined with the communications capabilities of a Remote
Site Manager, the CCU incorporates non-networked devices into your network
management system.
• Dimensions: 17.5 x 7.8 x 1.75 Inches / 44.45 x 19.812 x 4.445 Centimeters
• Monitor up to 32 or 64 on-board dry contact closure inputs
• Detect doors and windows opening at remote sites
• Monitor legacy equipment and non-networked devices via your network
management system
• Utilize optional -48 VDC power supply to maintain operation in a power outage
ADDITIONAL PRODUCT DETAILS
For  ve or more linear EventSensor connections, be sure to check power usage
requirements. Contact Sales for more details. ES-CCU contact closures are non-
isolated and dry. These EventSensor items are catalog line items separate from
the base units they will be connected to. Thus they should be listed on a separate
line in your speci cation or purchase order.
ES-I/O - Variable
Monitoring & I/O
Expansion
DESCRIPTION CODE PRICE
8 Dry Contact Closure Sensor ES-8C $145
8 Contact Closure Sensor - Isolated ES-8CI $270
8 Analog Voltage Sensor ES-8V $305
8 Low-Current Relay ES-8R $270
8 4-20mA Sensor ES-8M $335
8 Solid State Relay ES-8SR $310
4 Contact & 4 Solid State Relay ES-4C4SR $240
4 Contacts & 4 Voltage Sensor - Non-Isolated ES-4C4V $245
4 Contact & 4 Isolated Voltage Sensor ES-4VI4C $370
4 Contacts & 4 Low-Current Relay ES-4C4R $220
4 Contacts & (4) 4-20mA Sensor - Non-Isolated ES-4C4M $245
4 Contact & 4 Isolated 4-20mA Sensor ES-4MI4C $420
4 Voltage Inputs & (4) +/-15 VDC Pwr Outputs ES-4VP $265
Add a temperature sensor to any I/O Sensors Add -T $75
DESCRIPTION CODE PRICE
32 C.C. inputs with 6 foot cable, AC power ES-CCU32/ACUS* $1025
64 C.C. inputs with 6 foot cable, AC power ES-CCU64/ACUS* $1395
32 C.C. inputs with 6 foot cable, DC power ES-CCU32/DC $1025
64 C.C. inputs with 6 foot cable, DC power ES-CCU64/DC $1395
ES-CCU - Environmental Monitoring
* For International usage you can specify /ACUK, /ACEU, or /ACAU for UK,
European, or Australian power supplies respectively.
ES-CCU64 Back Panel
ES-CCU32 Back Panel
ES-CCU back panel close-up
ES-I/O Front Panel