Powerful PBX Management 2014 Asentria Telemanagement Product Guide
Table of Contents TELEMANAGEMENT OVERVIEW.................................................... PAGE 3 ASENTRIA HARDWARE TELEBOSS OVERVIEW............................................................. PAGE 4 T850 / T850 JITC DATA SHEET.................................................. PAGE 5 T850 SPECIFICATIONS & PRICING.......................................... PAGE 6 T850-JITC SPECIFICATIONS & PRICING................................. PAGE 7 T830 DATA SHEET.....................................................
Asentria Corporation - Serving Telemanagement Customers For Over 30 Years. TELEMANAGEMENT BENEFITS TO PBX VENDORS: OVERVIEW Asentria develops telemanagement solutions that enable providers of critical communications infrastructure to more efficiently and reliably run their networks. Asentria’s products help ensure quality of service and lower operational costs, while making it easier to provision, maintain and support remote equipment.
TeleBoss Overview TM COLLECT CDR OR OTHER RECORDS BY SERIAL OR TCP/IP The TeleBoss products collect and store text-based event records from telecom devices such as PBXs, Voicemail systems, ACDs and other similar devices. Typically, these records are collected via the device’s serial port, but Asentria provides the industry’s first support for IP Record Collection™ (IPRC) - the ability to query your IP PBX for data via a network connection.
TeleBoss 850 TM HIGHLIGHTED FEATURES HIGH PERFORMANCE COLLECTION CPE MANAGEMENT AND CDR IDEAL USE The TeleBoss 850 is well suited for the following applications: 1) CALL ACCOUNTING - PBX CDR/SMDR data collection via either a serial port or via an Ethernet connection to the PBX. Via Ethernet, the T850 can collect data from Avaya, Alcatel, Mitel, Nortel, and Cisco switches. Once stored in the T850’s non-volatile memory, data can be delivered via FTP or modem to a call accounting application.
TeleBoss 850 Specifications & Pricing TM BASE UNIT CONFIGURATION •• •• •• •• •• 2 RJ45 Serial I/O Ports 2 10/100 Ethernet Ports 0, 2 or 6 Expansion Card Slots 1 MMC Memory I/O Slot AC Power Input OVERVIEW DEVICE SPECIFICATIONS •• •• •• •• Unit Width: 7.5-17.5in / 19.05-44.45cm •• •• •• •• •• •• •• •• •• •• •• •• Mounting: Shelf or 19in rack Unit Height: 1.75in / 4.445cm Unit Depth: 7.25-7.8in / 18.415-19.812cm Unit Weight - dependent on config.: 3-5lbs / 1.36-2.
TeleBoss 850-JITC Specifications & Pricing TM BASE UNIT CONFIGURATION •• •• •• •• 2 RJ45 Serial I/O Ports 2 10/100 Ethernet Ports 2 or 6 Expansion Card Slots AC Power Input DEVICE SPECIFICATIONS •• •• •• •• Unit Width: 11-17.5in / 27.94-44.45cm •• •• •• •• •• •• •• •• •• •• •• •• Unit Height: 1.75in / 4.
FEATURED BENEFITS TeleBoss 830 TM •• •• Collect SMDR / CDR / Traffic / ACD •• •• •• •• •• •• •• •• •• •• •• Remote maintenance port access Wireless cellular, ADSL, and/or dialup modem options communications and monitoring I/O interfaces that might be desired for your specific site application. •• Equipment / Environmental sensor options IDEAL USES •• Optional run-time battery / DC power options Ethernet, the T830 can collect data from Avaya, Alcatel, Mitel, Nortel, and Cisco switches.
TeleBoss 820 TM BASE UNIT CONFIGURATION •• 4M Storage for CDR or other Text Records •• •• •• 2 RJ45 Serial I/O Ports 2 10/100 Ethernet Port AC Power Input IDEAL USE HIGHLIGHTED FEATURES Low-Volume CDR Collection From a PBX - The TeleBoss 820 is a low-cost CDR data collection device targeted specifically toward low-volume locations for clients such as call accounting software vendors, call accounting service bureaus, and end •• 4MB of CDR Memory storage (about 150K CDR records) users who need to co
TeleBoss Product Matrix TM T850-6 T850-2 T850-0 T850-6-JITC T850-2-JITC T830-6 T830-2 T830-0 T820 17.5in Wide 11 Inch Wide 7 Inch Wide 17.5in Wide 11 Inch Wide 17.
TeleBoss Product Matrix TM T850-6 T850-2 T850-0 T850-6-JITC T850-2-JITC T830-6 T830-2 T830-0 T820 17.5in Wide 11 Inch Wide 7 Inch Wide 17.5in Wide 11 Inch Wide 17.
TeleBoss Product Matrix TM T850-6 T850-2 T850-0 T850-6-JITC T850-2-JITC T830-6 T830-2 T830-0 T820 17.5in Wide 11 Inch Wide 7 Inch Wide 17.5in Wide 11 Inch Wide 17.
TeleBoss Product Matrix TM T850-6 17.5in Wide Advanced T850-2 11 Inch Wide Advanced T850-0 7 Inch Wide Advanced T850-6-JITC T850-2-JITC 17.5in Wide 11 Inch Wide Advanced Advanced T830-6 17.5in Wide Basic T830-2 11 Inch Wide Basic T830-0 7 Inch Wide Basic T820 7 Inch Wide Basic 2.10.540 2.10.540 2.10.540 2.10.520 Software Applications Available by Product Firmware Version 2.10.540 2.10.540 2.10.540 Web UI v2 2.06.560.003 2.06.560.
TeleBoss Product Matrix TM T850-6 17.5in Wide Advanced T850-2 11 Inch Wide Advanced T850-0 7 Inch Wide Advanced T850-6-JITC T850-2-JITC 17.5in Wide 11 Inch Wide Advanced Advanced T830-6 17.
Expansion Cards CONNECTIVITY CARDS DESCRIPTION Wireless EDGE (GSM) Modem Wireless EVDO (CDMA) Modem - SPRINT Wireless EVDO (CDMA) Modem - VERIZON ADSL Modem Dial-Up Modem 4X RS232 Serial Port 2X RS485 2X RS232 Serial Port 4X 10/100 Ethernet Port GPS Receiver CODE ME MCS MCV MA* MD 4S 2DS2S 4E* GPS PRICE $500 $800 $800 $200 $250 $200 $230 $400 $250 * 4E and MA cards cannot be used at the same time in the same unit. 4E and MA cards are not yet supported in the S571 or S572.
Expansion Cards SPECIALTY 8 CONTACT CLOSURE SENSOR - 8C Asentria offers a variety of specialized Expansion cards for your application. From communication to remote accessory connection, the growing list of Specialty Expansion cards are designed to suit your particular need. Asentria base units must have an Expansion slot to accept Asentria Expansion Cards. Refer to the Product Matrix for more information on applicable units. Add 8 non-isolated contact closure inputs to any Asentria base unit.
Expansion Cards 4 CONTACT & 4 VOLTAGE SENSOR - 4C4V 2 WIEGAND INTERFACE W/POWER & 2 LOWCURRENT RELAY - 2W2R Add 4 non-isolated dry contact closure inputs and 4 non-isolated voltage inputs to any Asentria base unit with an expansion slot. Add 2 Wiegand interface with power and 2 relay outputs to any Asentria base unit with an expansion slot. • Voltage points: -60/+60 VDC • Resolution: 0.1 VDC • Max switched VDC: 60 Accuracy: +/- 0.5 VDC • Max switched power: 30W • Max switched current: 0.
Wireless Plans IN/OUT-OF-BAND ACTIVATION Asentria’s Wireless modem Expansion cards allow the Asentria unit to interface directly with a cellular network system (such as AT&T Wireless). All Asentria wireless Expansion cards come with a detachable antenna. Depending on your application, an additional external antenna may be necessary to improve signal strength. Wireless modems do not include service plans. Asentria base units must have an Expansion slot to accept Expansion cards.
Asentria EventSensors™ Expand the Power & Reach of Your SiteBoss Unit OVERVIEW I/O EXPANSION Asentria offers a full line of EventSensors to help you monitor the passive and active equipment at your remote site. EventSensors provide users with additional I/O to Asentria base units, as well as power, operating environment, and security accessory devices ranging from basic environmental sensors all the way to complex products for complete management of critical equipment components.
EventSensor I/O Expansion ES-I/O - Variable Monitoring & I/O Expansion ES-CCU - Environmental Monitoring DESCRIPTION 8 Dry Contact Closure Sensor 8 Contact Closure Sensor - Isolated 8 Analog Voltage Sensor 8 Low-Current Relay 8 4-20mA Sensor 8 Solid State Relay 4 Contact & 4 Solid State Relay 4 Contacts & 4 Voltage Sensor - Non-Isolated 4 Contact & 4 Isolated Voltage Sensor 4 Contacts & 4 Low-Current Relay 4 Contacts & (4) 4-20mA Sensor - Non-Isolated 4 Contact & 4 Isolated 4-20mA Sensor 4 Voltage Inputs
EventSensor I/O Expansion ESJ-HUB - SensorJack Expansion Hub CCS-32, CCS-16 - Input Contact Splitters CCS-16 DESCRIPTION 8 Port SensorJack Hub Add DIN Rail Mount CODE ESJ-HUB /DIN PRICE $180 $10 IDEAL USE This wired 8-port hub device has 7 ESJ (SensorJack) output ports, one of which is a combination ES/ESJ Type 2 port. Each port can support a chain of ESJ devices (or a chain of ES Type 2 devices on the ES/ESJ port).
Environmental Monitoring EventSensors OVERVIEW EVENTSENSOR TEMPERATURE/HUMIDITY SENSOR When combined with their respective external accessories, Asentria base units have the capabilities to monitor many different environmental factors within a cabinet or equipment room. Commonly monitored environmental factors include temperature, fire, air-flow, and presence of water. Left unattended, any of these conditions can potentially cause catastrophic failure of equipment at a remote site.
Environmental Monitoring EventSensors EVENTSENSOR™ COUPLER/ADAPTERS AND CABLES WATER SENSOR SensorJack and EventSensor sensors can be chained, split, and extended with EventSensor RJ45 connectors and RJ45 cables. Up to 16 sensors can be chained to a single SensorJack or EventSensor port on the Asentria base unit. Use EventSensor RJ45 cables to extend the reach of your SensorJack and EventSensor environment sensors. Maximum total length of each sensor cable chain is 100 feet.
Power Monitoring EventSensors AC/DC POWER MONITORING AC POWER MONITOR Asentria’s power monitoring devices put the power in your hands. Measure voltage, current, and total power in DC power systems; and in single-, split-, and three-phase AC power systems. Select from a wide variety of power-measurement sensors to fit your needs. Attach them to your Asentria base unit to detect and correct site power problems early, BEFORE they become major problems.
Power Monitoring EventSensors SINGLE PHASE AC CURRENT MONITOR AC VOLTAGE MONITOR This self-powered, solid-core AC current monitor works with any Asentria device that supports analog sensing. It provides a signal output of 0-5 VDC analog output proportional to the AC current flowing through the core. UL/CE listed. This device accurately measures AC voltage levels, and provides a 4-20mA current-loop signal output proportional to the amount of AC voltage present. Voltage transformer is included.
Security Monitoring EventSensors DOOR ACCESS STRIKE DOOR SENSOR KIT The door strike replaces a standard mechanical door strike plate with an electrical one that can be remotely locked/unlocked via relay output to control access to a room. Fail-safe operation maintains secure access even during power failure. Rugged stainless steel body; works with any standard metal door. Can be used with any Asentria relay output.
Miscellaneous Accessories EVENTSENSORS To connect a second EventSensor to the first EventSensor in a daisy chain fashion, you can use our EventSensor cables (see below), or a standard CAT5E Ethernet cable. For five or more linear EventSensor connections, be sure to check power usage requirements. Many EventSensors can be bundled with one or more kit options selected from the list below. See each EventSensor listing for available kit options.
Support, Warranty & Training Information SUPPORT WHEN YOU NEED IT TECHNICAL SUPPORT / TRAINING Asentria Technical Services provides a full-range of consulting services, including planning, design, deployments, upgrades, migrations, and custom development support. Asentria Support Services is dedicated to helping you achieve the most from your Asentria products while improving your ROI, reducing your administration obstacles, and ensuring the reliability of your remote equipment sites.
Terms of Sale and Delivery 1. All Sales are Final. 2. Purchase Orders: Product is provided pursuant to customer purchase order accepted by Asentria. Purchase orders accepted by Asentria shall be considered binding on both customer and Asentria for the quantity and type of product and within the date or time period specified on the purchase order excepting mutually agreed adjustments. 3. Credit Sales: All credit sales are subject to Credit Approval. 4.
[ 1200 N. 96th St., Seattle, WA 98103 ] [ Tel: 206.344.8800 ] [ Fax: 206.344.2116 ] sales@Asentria.com Asentria.com BACK TO T.O.C. v4.5 - 12.18.
