User manual

P a g e 8 5 o f 9 3
S N M P
S N M P ( S i m p l e N e t w o r k M a n a g e m e n t P r o t o c o l ) i s o n l y u s e f u l i f y o u h a v e a S N M P p r o g r a m o n y o u r P C . T o r e a c h t h i s
s c r e e n , s e l e c t S N M P i n t h e M a n a g e m e n t s e c t i o n o f t h e m e n u .
Figure 80: SNMP Screen
D a t a - S N M P S c r e e n
General
E n a b l e S N M P
Use this to enable or disable SNMP as required
C o m m u n i t y
Enter the community string, usually either "Public" or "Private".
A c c e s s R i g h t s
Select the desired option:
• Read-only - Data can be read, but not changed.
• Read/Write - Data can be read, and setting changed.
Managers
A n y S t a t i o n
The IP address of the manager station is not checked.
O n l y t h i s s t a t i o n
The IP address is checked, and must match the address you
enter in the IP address field provided.
If selected, you must enter the IP address of the required
station.
Traps
D i s a b l e
Traps are not used.
B r o a d c a s t
Select this to have Traps broadcast on your network. This
makes them available to any PC.
S e n d t o
Select this to have Trap messages sent to the specified PC
only. If selected, you must enter the IP Address of the desired
PC.
T r a p v e r s i o n
Select the desired option, as supported by your SNMP
Management program.