User manual

P a g e 4 0 o f 9 3
I n t e r n e t A u t h e n t i c a t i o n S e r v i c e ( R a d i u s ) S e t u p
82. Select Start - Programs - Administrative Tools - Internet Authentication Service
83. Right-click on Clients, and select New Client.
Figure 30: Service Screen
84. Enter a name for the access point, click Next.
85. Enter the address or name of the Wireless Access Point, and set the shared secret, as entered on the
Security Settings of the Wireless Access Point.
86. Click Finish.
87. Right-click on Remote Access Policies, select New Remote Access Policy.
88. Assuming you are using EAP-TLS, name the policy eap-tls, and click Next.
89. Click Add...
If you don't want to set any restrictions and a condition is required, select Day-A n d -Time-Restrictions, and
click Add...
90.
Figure 31: Attribute Screen
91. Click Permitted, then OK. Select Next.
92. Select Grant remote access permission. Click Next.
93. Click Edit Profile... and select the Authentication tab. Enable Extensible Authentication Protocol, and select
Smart Card or other Certificate. Deselect other authentication methods listed. Click OK.