User guide

22
Input Channel
Two mixer input channels are shown below.
The controls available on the input channels are as follows:
Audio source select
This is the button at the top of the channel strip; when no source is selected to the channel, it will
display Off.
Clicking the button offers two lists: Inputs and DAW; selecting
Inputs opens a list of all the available Scarlett 18i20 inputs, and
selecting DAW opens a list of all the available DAW outputs. Any
input not available is greyed-out (e.g., analogue inputs 2 to 8 are
already assigned elsewhere in the example shown).
Note that channels may be mono, or in pairs for stereo operation.
Stereo operation “borrows” a adjacent channel and lets you
control both left and right legs of the stereo signal with a single
fader. See “Stereo” on page 24 for details of mono/stereo
channel definition.
Note that an input can only be assigned to one channel in each
mix. If it has already been assigned, it will be greyed-out on other
channels.
To include previously-recorded DAW tracks, or audio from other
computer applications into the mix, select the two relevant DAW
inputs as a stereo input track. These may typically be =8J'3 and
=8J'6, but this will depend how the outputs of the DAW or other
computer application are routed.