User`s manual

eBOX832-840 Series User’s Manual
Award BIOS Utility
40
z Super IO Device
Scroll to this item and press <Enter> to view the sub menu Super
IO Device.
¾ Onboard FDC Controller
Select Enabled, if your system has a floppy disk controller
(FDC) installed on the system board and you want to use it.
If you install and-in FDC or the system has no floppy drive,
select Disabled in this field. Options: “Enabled” and
“Disabled”.
¾ Onboard Serial Port 1/2
Select an address and corresponding interrupt for the serial
port. Options are: “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”,
“2E8/IRQ3”, “Auto” and “Disabled”.
¾ Onboard Serial Port 3
This item assigns which I/O address to access onboard
serial port 3.
¾ Serial Port 3 Use IRQ
This item selects a corresponding interrupt for the third serial
port.
¾ Onboard Serial Port 4
This item assigns which I/O address to access onboard
serial port 4.