Ethernet Extension Experts Enable-IT 828 Gigabit Ethernet & PoE+ Extender User Manual All Rights Reserved 1997 - 2011 ENABLE-IT - Proprietary and Confidential
Copyright © 1997-2011 Enable-IT, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Enable-IT, Inc. Enable-IT, Inc reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of Enable-IT, Inc to provide notification of such revision or change.
CONTENTS ABOUT THIS GUIDE 4 1 INTRODUCING THE ENABLE-IT 828 GIGABIT ETHERNET & POE+ EXTENDER 5 About the 828 Gigabit Ethernet & PoE+ Extender Key Benefits Summary of Features Typical Use Applications 5 6 6 7 2 INSTALLING THE ENABLE-IT 828 GIGABIT ETHERNET & POE+ EXTENDER Site Plan – Installation Design Considerations Unpacking the 828 Gigabit Ethernet & PoE+ Extender Perform an out of the box Test Performing the On-Site Installation Mounting the 828 Gigabit Ethernet & PoE+ Extender Attaching cabling and
ABOUT THIS GUIDE This guide provides all the information needed to install and use the Enable-IT 828 Gigabit Ethernet & PoE+ Extender. This guide is intended for use by technicians who are responsible for installing and setting up network equipment. Consequently, it is assumed that the installer has a basic working knowledge of LANs (Local Area Networks) and voice telecom wiring.
INTRODUCING THE 828 GIGABIT ETHERNET & POE+ EXTENDER Congratulations on purchasing the Enable-IT’s 828 Gigabit Ethernet & PoE+ Extender — the fastest and simplest method to stretch your broadband solutions for in-building deployment in commercial office buildings, hotels, and multi-tenant residential units. The 828 Gigabit Ethernet & PoE+ Extender offers the Lowest Cost Solution in a simple design for rapid install using existing Category 5, 5e or 6 wiring (All 4-pairs required).
Key Benefits The following list identifies the 828 Gigabit Ethernet & PoE+ Extender key benefits. • Dramatic cost reduction over any competing technology (Copper or Fiber) • Extreme Broadband technology that delivers Full Speed Gigabit Ethernet up to five times the IEEE 802.3 distance limit over Category 5 wiring or better. • Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
Typical Use Applications Enable-IT 828 Gigabit Ethernet & PoE+ Extender can be quickly installed on existing or new Category rated wiring infrastructures where extension of backbone services is required and expensive fiber options are prohibitive. The 828 Gigabit Ethernet & PoE+ Extender allows a standard Ethernet segment to be deployed quickly over existing Category 5, 5e or 6 wiring (All 4-pairs required).
INSTALLING THE 828 GIGABIT ETHERNET & POE+ EXTENDER The Enable-IT 828 Gigabit Ethernet & PoE+ Extender units have an individual distance restriction of approximately 900ft or 275m over existing Category 5, 5e or 6 wiring (All 4pairs required) from device extension to device extension. The 828 units can communicate 400ft / 122m distance out each LAN port – so placing the 828 in the middle of your run is ideal. 828 units are designed to be daisy chained in a series to further extend distance.
Unpacking the Enable-IT 828 Gigabit Ethernet & PoE+ Extender Carefully remove the Enable-IT 828 Gigabit Ethernet & PoE+ Extender and all packing materials from the box. Verify that the items listed below are present. Make sure that the equipment supplied matches what you ordered. If any items are missing or damaged, please contact Enable-IT or your distributor for assistance.
Option 2: Standalone 828 unit powered by your PoE injector or PoE switch. Option 3: 828P Kit with 60w-56v PoE+ injector. Option 4: 828P Kit with 60w-56v PoE+ injector and multiple 828 units. Mounting the Enable-IT 828 Gigabit Ethernet & PoE+ Extender The Enable-IT 828 Gigabit Ethernet & PoE+ Extenders are designed for quick wall mounting. Choose a location to mount the Enable-IT 828 where the inline midpoint is no further than 400ft / 122m from your source Ethernet LAN and destination endpoint.
DIP Switch Settings 4 DIP Switches are provided in between Extender Output ports for setting PoE output power on or off. Default DIP settings – Disabled PoE output DIP position 1, 2, 3, & 4 Up (OFF – no PoE Output) To Enable -PoE output DIP position 1, 2, 3, & 4 Down (ON – PoE Output) Image shown above has PoE enabled on the LAN port to the left and PoE disabled on the right.
Online Technical Services The Enable-IT Support Portal is available 24/7. No password or user account is necessary. Please use this support website as your first source for help as it contains an on line knowledge base of articles, documentation, FAQ's and other problem-solving resources. This web-based support resource provides the quickest solution to the most common technical support issues. http://support.enableit.com Returning Products for Warranty Repair Enable-IT, Inc.
reconditioned Product provided pursuant to this paragraph is warranted as provided herein for the remainder of the original Warranty Period. THE REMEDY SET FORTH IN THIS PARAGRAPH SHALL BE THE END USER’S SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE FOREGOING WARRANTY. c.
CONTRACT OR IN TORT (INCLUDING NEGLIGENCE), OR STRICT LIABILITY, EVEN IF ENABLE-IT HAS BEEN PREVIOUSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND EVEN IF A LIMITED REMEDY SET FORTH IN THIS AGREEMENT FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL ENABLE-IT’ LIABILITY TO THE END USER OR ANY THIRD PARTY EXCEED THE PRICE PAID FOR THE PRODUCT.