User manual



Key Benefits

The following list identifies the 820P Pro IP PoE Camera Extender Kit key benefits.

 Dramatic cost reduction over any competing technology.

 The Enable-IT 820P Pro IP PoE Camera Extender Kit requires no firmware and

no maintenance

 Broadband technology that delivers in-building Ethernet access over 4 pair of

existing Category 2, up to Category 5e, 6 or 7, wiring up to 800ft (244m), whether

spare or actively in use for analog or digital voice. This means no new wiring is

required.

 Provides one scalable infrastructure for Internet access, dual POTS, VoIP, video,

Power over Ethernet (PoE) and virtual private networking.

 Rapid installation with small box profile; no programming and no firmware to

upgrade.

 Low profile box with PoE and Ethernet data all in a single RJ-45 Ethernet jack.

Summary Of Features



The Enable-IT 820P Pro IP PoE Camera Extender Kit has the following hardware

features:



Extended Ethernet and PoE over existing CAT2 up to CAT5e / CAT7 wiring

 Rapid Telco style installation – no programming required

 Supports digital VoD channels

 Drives Ethernet 15 Mbps full-duplex service delivery up to 800ft (244m)

 Network Equipment independence – Transparent to protocols/applications/MAC

 Maintains lifeline POTS

 802.3af Standard & Cisco PoE (Power over Ethernet) support – active/pass through

Specifications: Functionality:

PoE powered unit Data Rates 15Mbps Full Duplex

Passive Device, No Firmware. Ethernet modes supported

10Mbps half-duplex

820P Pro Dimensions: 10Mbps full duplex

Height: 1" (25mm) Max Distance 244m / 800ft

Depth: 3.25" (82.6mm) PoE compatible – active/pass through

Width: 4.4” (111.7mm)

Interfaces: Environment:

(1) RJ-45 10Mbs LAN input/output w PoE Operating temp: -49°F to 168°F (-45°to 76°C)

(1) RJ-45 Transport Interlink port Humidity 5% to 90%, non-condensing

(1) Optional 5v DC Power adapter input – not required for 820P Pro that is PoE Powered