User manual



INTRODUCING THE 820P PRO ETHERNET EXTENDER KIT

Congratulations on purchasing the Enable-IT’s 820P Pro 820P Pro IP PoE Camera Extender Kit

— the simplest method to stretch your broadband solutions for in-building deployment in

commercial office buildings, hotels, and multi-tenant residential units.

The 820P IP PoE Camera Extender Kit offers the Lowest Cost Solution in a simple design

for rapid install using existing 4 pair Telco wiring.

This chapter contains introductory information about the 820P Pro Extended Ethernet Kit

and how it can be used in your network. It covers the following topics:

 About the 820P Pro Extended Ethernet Kit

 Key Benefits

 Summary of Features

 Typical Applications

DO NOT INSERT ANY BLANK RJ-45 HEADS INTO ANY PORTS BEFORE CRIMPING

– OTHERWISE YOU WILL RENDER THE PORT USELESS – BENT PINS

About the 820P Pro Extended Ethernet Kit

The 820P Pro IP PoE Camera Extender Kit solves the problem of high costs associated

with stretching your backbone with traditional fiber or a series of hubs/repeaters.

In many office buildings, preferred network access is a dedicated Ethernet line,

however Ethernet over twisted pair wiring has its distance limitations of just 328 ft. In

order to drive Ethernet signal further, one would have to add repeaters to each

segment of 328ft twisted pair cabling; this is often insufficient and too costly in multi-

story buildings. Fortunately, the Enable-IT 820P Pro Series Extended Ethernet can

push the reach of Ethernet to almost 3 times the typical Ethernet distance.

A simple design methodology would be to think of the 820P Pro extending a standard

Ethernet line with power (PoE) up to 800ft (244m) and can also include 2 voice lines

simultaneously.

To increase the durability and extended use of the product providing maximum future

technology protection, 820P Pro Extended Ethernet Unit meets the challenge of modern

switched LANs and allows you to add features and capacity as your network expands.

The 820P Pro LRE kit includes a high powered PoE switch kit and the 820P Pro unit itself.

Unit Model Wiring Data Rate Max. Distance

820P Pro (4) pair CAT 2 up to CAT5e 15MB FD 800ft / (244m)