Specifications

4. Remove the TouchPad and cable (3).
Reverse this procedure to install the TouchPad.
Card reader board
Description Spare part number
Card reader board (includes cable) 730563-001
Before removing the card reader board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see
Service cover on page 48), and then remove the following
components:
a. Battery (see
Battery on page 50)
b. Hard drive (see
Hard drive on page 52)
c. Keyboard (see
Keyboard on page 62)
d. Top cover (see
Top cover on page 69)
82 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts